Yaqin MC13s Upgrades and Switchable Feedback Installed

Another Yaqin 13s on the workbench for the usual upgrades: upgraded coupling capacitors, upgraded grid stopper resistors and fitting of cathode bypass capacitors. These mods worked their usual charms and gave a very decent performance, even with the stock tubes. This time tho, I tried the amp with negative feedback removed. The difference was dramatic, and so a small switch was installed on a plate to replace the mains voltage switch which was re-mounted inside the chassis. In my set up, I never switched the feedback back on and both myself and my regular ‘golden-eared’ mates considered it way better. Here’s what the owner had to say:

‘Just collected my MC13S following David’s mods and I’m stunned! In addition to the mods described above David also fitted a feedback bypass switch and with the negative feedback switched off the resolution of this amp is incredible. I keep wanting to try another track to test the improvements but find myself having to hear the whole track before switching, which is not something that usually happens when I buy new kit. All in all I’m very pleased with these mods….’


Yaqin MC 13S Modifications-another giantkiller!

I’m constantly amazed by the results of upgrading Yaqin amps of which I’ve now completed quite a few. I remember my nervousness upgrading the first one as the received wisdom was ‘Chinese transformers are no good’. Yaqin’s transformers are made in house and they claim, are made of Japanese steel.Whatever the ingredients the result is an amplifier that sounds very decent as standard but which can easily be improved with some simple upgrades.

Circuit wise the amp is a fairly standard ultra linear output stage with input and phase splitter. The upgrades this time were to add improved Mundorf coupling caps, to change the grid stopper resistors on the output valves and to add Elna Silmic bypass capacitors to the output valves.



Once installed the amplifier performs at a new level. The light graininess of the sound disappears, vocals become more breathy, and bass and dynamics improve. All these improvements were heard with the stock Chinese valves and of course these too can be swapped for improved Western designs or NOS types.


Yaqin MS 300B Giantkiller for Around a Grand.




I’ve upgraded many Chinese amps now and I enjoy working on them. Most are fairly easy to work on, and the circuitry can be improved to offer dramatic improvements in sound quality. There are two key questions:

  1. Safety
    Many of these amps are designed to run on 220v, and not our Euro standard mains of 230v +/- 10%, which means that UK mains can be as high as 253v and still be within spec. In many cases the mains transformer on the Chinese amp will run coolly at 240 or so volts however safe or not that might be, you are straining the valves’ heaters. For example an extra 10% on the heater voltage puts the heater supply at 6.93v, above the recommended and desirable limit for valves’ heaters.

    So the solutions are to replace the mains transformer, use a bucking transformer, or a Variac. Personally I prefer to replace the mains transformer with a UK made one. The cost is comparable to the cost of a bucking transformer or Variac and there are no operating disadvantages. Bucking transformers may hum, and Variacs may affect sound quality, although folk report good results with both.

  2. The Quality of the Output Transformers
    This was always put always put forward as the strong reason not to bother with Chinese amplifiers. But I’ve upgraded Yaqins, Music Angels, and Bowei clones and the results have been from spectacular to excellent and on these amps the improvements were not limited by the output transformers.

So on to the Yaqin MS300B. This amp can be turned into a giantkiller at the cost of a few hundred pounds. As you buy the amp for around £600 from Hong Kong, that means you can achieve a fabulous level of sound quality for around £1,000. And I mean sound quality that will live with many more expensive 300b amplifiers.

For reasons best known to themselves Chinese amplifier designers produce decent circuitry, but then cripple the sound quality with large amounts of feedback. Coupling capacitors and cathode bypass capacitors also leave much to be desired. Resistors are of decent quality so can be happily left alone.


The photo above compares the replacement upgrade Elna Silmic cathode bypass capacitors  with the originals. The originals are also branded ‘Elna’ but I’m a bit suspicious of them as they have the writing in a different direction to the usual Elna style. Not to say Elna didn’t produce a special run for Yaqin, but other Chinese amps I’ve upgraded have had capacitors labelled ‘Rubaycon’ an obvious counterfeit of the well-known Japanese brand Rubycon!

The coupling caps also didn’t match on the two channels, one having a 470nf value and the other channel having 220f value.

The Yaqins use a local feedback circuit in the driver stage and additionally global feedback. the global feedback is switchable to become less when the input labelled ‘direct’ is used. My modifications are to remove the local feedback network completely and to make the global feedback switchable. We can either use the headphone switch if an owner doesn’t use the headphone output or a small switch can be installed on the rear panel. Using this switch it is very easy to hear the difference of feedback and no feedback. I don’t know of anyone who uses their amp with feedback once this mod has been done.

Another mod I do is to build in a slow start delay circuit as 274B rectifiers can start up too quickly for the 300b’s comfort. Using such a delay circuit with a slow ramp up and 75s delay means that you can use any rectifier tube. Another way to give the amp a slow starts to use an indirectly heated rectifier such as the GZ34 or GZ37, but the latter in particular is getting pricey and other rectifiers may provide better sound quality. My personal favourite for sound quality is the Chatham 5R4GY. This is a military spec rectifier that some claim is the best ever made. The glass and base certainly demonstrate the rugged military origins of this tube and it just seems to provide more clarity and dynamics than other tubes including some ridiculously expensive KR Tubes rectifiers we tried.


Slow start module installed in space by smoothing capacitors in photo above.


The Mundorf ZN coupling capacitors and Elna Silmic coupling capacitors are clearly visible in the photo above. The one remaining blue capacitor at the top of the photo is in the feedback loop and can be switched out of circuit after the modifications.


Under the bonnet before the mods!

So what is sound quality like? After the mods the amp has a sound quality to compete with the best. It compares very well with my customised 300b stereo power amplifier, producing a that glorious single-ended midband but with real bass authority, speed, dynamics and slam. Remember though, power output is only around 8 or 9 watts so you need some fairly efficient speakers to get the best out of these amps. My own custom built speakers (93db sensitivity) or modified Goodmans Magisters (94db sensitivity) perform beautifully with this amp.


Recent Projects

IMG_20151221_200113818Some Recent or Completed Projects
1. Valve Amplifiers /Preamps 

Built KT88 and EL34 stereo valve amps

Built 300b Monoblocs
Built 300b stereo valve amp with interstage transformer
Built Cathode follower, Aikido and other valve pre amps

Upgrade of top of range Ming Da pre including shunt pot and key signal path components
Upgrade of 300b stereo amp with battery bias, coupling capacitors, and key signal resistors
Upgrade of 300b monoblocs with battery bias and key signal components
Installation of own design psu upgrades to Cathode Follower pre + upgrade of key signal components
Upgrade of 300b amp with new choke psu, battery bias and signal resistors

Upgrading power supply of Amphion 6C33 Monoblocs, plus upgraded key signal components

Upgrade and servicing of Amplifon 6C33 push pull amplifier

Upgrade of Cathode follower Pre amp with split psu rail, shunt pot mod etc

Rebuild of 2E22 Chinese SE amp with upgraded power supplies, Western components, Hammond output transformers etc

Repair of Valve Amplification Company (VAC) Renaissance 30/30 amplifier

Upgrade of Yaqin 300b SE amp and removing all local and global feedback. This amp is now definitely a giantkiller!

Service /upgrade of Tube Technologies Unisys amp

Servicing /repair/upgrades to four Audio Innovations 500 amplifiers

Service /repair to Audio Innovations 300 amplifier

Upgrade to Ming Da 300b preamp

Repair /upgrade to Conrad Johnson CT 5 preamp

2. Valve /Solid State Hybrids
Upgrade of ARC SP9 pre including addition of choke regulated power supply

3. Digital /Dacs
Conversion of 5 CD players using TDA 1541 chips to NOS output, with different designs of output stage from capacitor direct, transformers and valve output stages

Conversion of I Pod to high quality digital source

Built custom Dac with valve output and masterclock synched to custom transport
Building of 5 DDDacs

Upgrading of power supplies on around 10 CD players

Repair /upgrade of  Helios CD player

Repair /upgrade of Theta Basic

4. General
Installation of remote control facility on 6 amplifiers and preamps.

Construction of 3 T amps